Press - Archive 2005

November 2005 - Witte Fixinspect at DC
Halving measuring time of bolts and holes Nothing holds up the measuring process more than ascertainment of holes. There are approximately 100 to 150 holes and bolts to measure in a car body. Accessibility for the measuring stylus is the biggest problem, whereby measuring staybolts at an angle is particularly challenging.
More
November 2005 - Clamping with Ice „Bedded“ and “ Gripped “ on Ice
The TKR company , who make special tools in the Western part of Germany has itself developed and produced fine-mechanical special tools, for the cable making technology . With a know-how that has grown with years of experience and their ultra modern machines, TKR Gevelsberg, manufactures an extensive and specialized spectrum of parts.
More
November 2005 - Clamping Technology for Airbus
standard right the way down the line. Because of this in the Varel plant, where for instance fuselage parts for the AIRBUS are machined, a Fladder machine is being used for deburring of these large aluminium workpieces.
More
November 2005 - Witte: Vacuum chucks as conveyor
Highly sensitive products like glass substrate for flat displays need to be handled extremely carefully or even better not manually handled at all. The Basler company took this to heart: Their quality control specialists offer equipment with a hovercraft transport conveyor belt system, which comprises of Witte modules. The original application for these modules was vacuum clamping.
More
November 2005 - Clamping filigree parts
For almost all shapes and sizes of parts there are suitable clamping technologies available on the market. However demands on clamping systems increase when parts are very large or very small. Conventional methods often cannot ensure acceptable results. When we are talking about non-magnetizeable parts with complicated shapes the following clamping methods provide good solutions depending on requirements: 1. Vacuum clamping technology 2. Freeze technology 3. Moulding technology 4. Modular clamping systems for measuring
More
November 2005 - Witte - Measuring Fixtures for DC
Building accurate measuring fixtures for different workpiece shapes and sizes using modular fixturing system Alufix.
More
Airbus Nordenham November 2005 - Airbus Nordenham
Manufacturing of fuselage parts for different Airbus projects is carried out in Nordenham.
More
November 2005 - fixturing systems for Phaeton
In this top level Volkswagen automobile there is a lot of quality work from Zwickau involved. The body for the top class “Phaeton” model of Volkswagen is built in Zwickau/Mosel manufacturing plant and as far as measuring is concerned is closely looked at during the complete manufacturing process. Highly modern equipment is used for all QA checks, after which final assembly takes place in the glass factory in Dresden.
More
November 2005 - Fixturing - Alufix always fits
Fixturing: Alufix always fits Alufix fixturing system for building measuring fixtures has asserted itself notably for complicated fixtures like meisterbocks for bodies-in-white.
More
November 2005 - Meisterbocks for holding complete bodies-in-white
During development of new car models all body parts must constantly undergo comprehensive quality checks, however data collected in this way says nothing about how adjacent parts fit in relation to one another.
More
Schnellbausatz für Messaufnahmen November 2005 - News from Horst Witte Gerätebau, Germany
Witte Bleckede, specializes in the development and manufacturing of modular workpiece fixturing systems, will present a rapid fixturing kit at the Control in Sinsheim (Germany). Alugrip can be integrated and used together with existing Alufix material.
More
Lehre mit Messuhr November 2005 - Stand alone solutions Gauges for manufacturing:
Witte Bleckede, manufacturer of different workpiece clamping systems also make gauges in aluminium.
More
Das Mini Ice Vice Gerä November 2005 - Mini Ice Vice
Clamping and machining of small parts has always been a big problem in manufacturing industries. Witte Bleckede, manufacturer of different clamping systems now offers a further item in their freeze technology range. With a clamping surface of 40x40mm Ice Vice Light is especially suitable for machining small parts.
More
VakuumStarterset November 2005 - Ready, steady, go
For newcomers to vacuum clamping technology Witte Bleckede now offers a starter set, which contains all items required from chuck to pump. This set is unique in that it can be used for various applications.
More
Airbus Nordenham November 2005 - Odyssee through the world of clamping technology
Clamping chucks with highest precision requirements Vacuum clamping technology for machining of micro-structured workpieces
More
October 2005 - Off the beaten track
Compared to conventional methods vacuum clamping has always had the edge when it comes to difficult part geometries or sensitive materials. Witte Bleckede offers decades of experience using vacuum clamping technology and is specialised in developing and manufacturing not only their own large range of standard items but more especially custom built solutions.
More
A-340 – fuselage parts clamped with vacuum October 2005 - A-340
Witte Bleckede, developer and manufacturer of different workpiece clamping systems, offers a comprehensive range of standard vacuum components which can also clamp complicated part geometries.
More
April 2005 - Modular vacuum chucks for various applications
Purchase of a modern machining centre is preceded by a time-consuming process of comparison and decision. Once selection has taken place the next decision must be made:
More

Certification marks & Award